Pumps Parker
Hydraulic direct mount pump with counter clockwise rotation. Usually used on larger trucks with bodies 12 ft. and longer. 48 gallons per minute at 1,800 rpm's, 2 or 3 line hookup installation with relief valve to protect pump and cylinder. Approximate weight of 76 pounds.
Airshift to Cableshift Shifter
The shifter has dual levers for shift cables to operate the pump and power take off.
Selector Valve With Air Cylinder
Selector valve with air cylinder.
Hydraulic Cylinder
Hydraulic cylinders are usually used with dump bodies ranging in lengths of 8 ft to 20 ft This cylinder is 6 inches in diameter , 3 stage, 130 " stroke, 2000 psi., 51,934 pounds of thrust with a closed length of 56" from pin hole to pin hole. Approximate weight of 260 pounds.
Air Tailgate Cylinder
The 3 1/2" double acting air cylinder is used on regular tailgates. With a 3/4" piston rod, 8" stroke and 1000 lbs. of pressure at 125 P.S.I.
High Lift Cylinder
The 7424 double acting air cylinder is used on the Demolition Dump Beds High Lift Tailgates that are under 60" in height. One on each side.
Tarps
These mesh tarps range in lengths from 8 ft. to 20 ft. They are 92" wide. These tarps are primarily used for hauling brush, sand and gravel.
Lights
Red Clearance Light, Yellow Clearance Light, Red Metro Light, Mol Grommet Kit, Oval Grommet
Tarp Spring
Tarp spring . One size fit most.
Pintle Hook (30 ton)
Pintle Hook (30 ton)
Pintle Hook (20 ton)
Pintle Hook (20 ton)
Electric Tarp Motor
Electric tarp motor. 12 Volt direct drive hi-torque motor (1.2 HP or .80HP)
Electric Tarp Switch
Electric Tarp Switch
